The SN65MLVD040RGZT is a 4-channel half-duplex M-LVDS Line Transceiver for transmitting and receiving multipoint-low-voltage differential signals in full compliance with the TIA/EIA-899 (M-LVDS) standard, which are optimized to operate at signaling rates up to 250Mbps. The driver ...The SN65MLVD040RGZT is a 4-channel half-duplex M-LVDS Line Transceiver for transmitting and receiving multipoint-low-voltage differential signals in full compliance with the TIA/EIA-899 (M-LVDS) standard, which are optimized to operate at signaling rates up to 250Mbps. The driver output has been designed to support multipoint buses presenting loads as low as 30R and incorporates controlled transition times to allow for stubs off of the backplane transmission line.
The M-LVDS standard defines two types of receivers, designated as type-1 and type-2. Type-1 receiver has thresholds centred about zero with 25mV of hysteresis to prevent output oscillations with loss of input, type-2 receiver implement a failsafe by using an offset threshold. The xFSEN pins is used to select the type-1 and type-2 receiver for each of the channels.
In addition, the driver rise and fall times are between 1 and 2ns. Controlled driver output voltage transition times for improved signal quality Bus pins high impedance when driver disabled or VCC<=1.5V Independent enables for each driver and receiver M-LVDS bus power up/down glitch-free 125MHz Clock frequency -1 to 3.4V Common-mode voltage range allows data transfer with 2V of ground noise 48 pin 7 X 7 QFN (RGZ) Green product and no Sb/Br Applications Communications & Networking, Clock & Timing, Signal Processing, Consumer Electronics Other details Brand TEXAS INSTRUMENTS Part Number SN65MLVD040RGZT Quantity Each (Supplied on Cut Tape) All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Image is for illustrative purposes only. Please refer to product description.