The ToolkitRC M6DAC is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, smart consumer-grade drone battery charging and has a multilingual user interface. The M6DAC has a built-in 200W power supply that allows ...The ToolkitRC M6DAC is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, smart consumer-grade drone battery charging and has a multilingual user interface. The M6DAC has a built-in 200W power supply that allows it to be powered from a 100~240V AC mains power source.
It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake. The M6DAC is capable of charging two batteries at up to 350W each, or, if both channels are used for one battery pack, then it can charge the pack at up to a very impressive 700W. A wide variety of different chemistry batteries can also be charged on the M6DAC, these include, Li - Po, Li - HV, Li - Fe, and Li-ion @ 1~6S, Ni - Mh @ 1~16S, and Pb @ 1~10S.
The M6DAC is simple and straightforward to use, it has a large, easy-to-read, wide-angle, back-lit, IPS 3.5"x480x320 pixel full-color LCD screen, angled for easy viewing, simple to use metal, menu scrolling/enter wheel, and a ch/exit button. Inputs include an AC and DC XT60 socket, and outputs include 2 x XT60 charging ports, 2 x 2~6S balance ports, and a USB port. When required, the powerful, intelligent, high-flow cooling fan cuts in to keep the internal temperature down to avoid any overheating of the unit.
The ToolkitRC M6DAC balance charger/discharger is a must for every modeler's workshop due to its versatility of being able to charge two batteries simultaneously, its ability to run from AC and DC power sources, and its easy-to-use, intuitive programming menus. Features: - Dual AC/DC power inputs, 100~240V AC or 7~28V DC - Will charge two battery packs simultaneously - Synchronous mode allows both channels to be used to charge one battery at up to an impressive 700W - Multilingual user interface - Ability to smart charge consumer-grade drone batteries such as those used in the DJI Mavic, Phantom, and Inspire - XT60, and 65W USB outputs - Large, easy-to-read, wide-angle, back-lit, IPS 3.5"x480x320 pixel full-color LCD screen Specs:Type: ToolkitRC M6DAC Dual 1~6S 15A 350W AC/DC Balance Charger/Discharger - Input Voltage: 7~28V DC/100~240V ACCharging Power: 2 x 0.1~15A@350WSynchronous Charging Power: 1 x 0.1~25A@700WBattery Types: LiPo/LiHV/LiFe/Li-ion@1-6S, Ni - Mh@1-16S, Pb@1-10SUSBC Output: 3.25A@20.0V (65W)USBC Protocol: PD/QC/AFC/FCP/SCP/PE/SFCP/VOCDisplay Screen: IPS full color, wide angle, backlit, 3.5"x480x320 pixel LCDBalance Current: 1000m - A@2~6SInternal Resistance Measuring: 1~100m - R@1~6SDimensions: 127x106x63mm - Weight: 700g - Mains Input Lead: Mains cable w/EU type plug Included:1 x ToolkitRC M6DAC Dual 1~6S 15A 350W AC/DC Balance Charger/Discharger1 x Mains lead w/EU type plug Please note: A copy of the user manual which includes a full list of all the functions is available under the "Manual/Files" tab above.